Community Support Forums

Re: [Solved] Place Secure Video

2012-01-16T22:16:07-05:00

Yes, I'm referring to the instruction at this thread viewtopic.php?f=4&t=2937, where it was mentioned that "type=video" is required to be added to the flashvars section in the advanced setting of the player/configuration.
This step is mandatory, hence it was the reason why the player won't work in the first place. It couldn't understand the video format because the video is not in it's standard format...

Angela

PS: can you help me take a look 2 of my threads? I'm pretty close to getting it done, just need a few more details. Thanks. (viewtopic.php?f=4&t=16833 and viewtopic.php?f=4&t=16717)

Statistics: Posted by angelazou — January 16th, 2012, 10:16 pm

Re: Place Secure Video

2012-01-16T21:49:35-05:00

angelazou wrote:
I got it, it was the missing flashvars parameter I'm missing. Can I suggest to update the instructions on the downloads page for the JW Player WP plugin so more people can benefit from it.

Glad to hear you figured it out! Could you explain what you did? Also, which instructions are you referring to?

Statistics: Posted by Raam Dev — January 16th, 2012, 9:49 pm

Re: Place Secure Video

2012-01-15T10:17:11-05:00

I got it, it was the missing flashvars parameter I'm missing. Can I suggest to update the instructions on the downloads page for the JW Player WP plugin so more people can benefit from it.

Statistics: Posted by angelazou — January 15th, 2012, 10:17 am

Re: Place Secure Video

2012-01-13T22:41:06-05:00

Well, I'm using a wordpress multisite installation, but I do not have S2member running on domain.com, only on training.domain.com. But the file system doesn't have an additional folder to hold files for training.domain.com, they are all located in domain.com folder. Hence, the absolute path to the file would be http://www.domain.com/wp-content/plugin ... s/filename.
I purchased the single site license, but that should gave me the ability to run S2member on all of my subdomains, no?

Angela

PS: or was it the multisite config that I missed? I went back to the main site and enabled S2member (although I'm not selling anything there, and have enabled the patches). However, the videos still didn't show up, just a black box.
I've added a sample testing video in the page that I have mentioned in my previous posts (under secure videos). The first two are using the absolute path, whereas the testing video is using the training.domain.com/?s2member_file_download=filename path.

Statistics: Posted by angelazou — January 13th, 2012, 10:41 pm

Re: Place Secure Video

2012-01-13T16:35:49-05:00

Do you have more than one copy of WordPress/s2Member running? In other words, is WordPress/s2Member running on training.domain.com AND domain.com?

Statistics: Posted by Raam Dev — January 13th, 2012, 4:35 pm

Re: Place Secure Video

2012-01-12T22:17:02-05:00

I did deactivated the other plugins, but it didn't make any difference.

Statistics: Posted by angelazou — January 12th, 2012, 10:17 pm

Re: Place Secure Video

2012-01-12T17:29:52-05:00

Have you tried disabling all your plugins (except s2Member) to see if that fixes the shortcode issue? That sounds like it could be a plugin conflict. You can use Plugin Organizer to disable all plugins on just one post/page if disabling them site-wide isn't possible.

Statistics: Posted by Raam Dev — January 12th, 2012, 5:29 pm

Re: Place Secure Video

2012-01-11T23:03:41-05:00

Yes, I tried the HTACCESS rules, but they caused my entire site to go down (and starting to show general errors). I still can access the videos if I use the URLs directly, even with the rewrite URL like 'http://training.centilin.com/?s2member_file_download=Network10.mp4', but once it's in the shortcode, it doesn't work.

Angela

Statistics: Posted by angelazou — January 11th, 2012, 11:03 pm

Re: Place Secure Video

2012-01-11T13:19:56-05:00

Hi Angela,

Please see if this thread helps: viewtopic.php?f=4&t=16510#p59497

Statistics: Posted by Raam Dev — January 11th, 2012, 1:19 pm

Re: Place Secure Video

2012-01-09T23:38:22-05:00

I did some more testing and finally got the video plugin up and running. But here is another problem, the player is having difficulty locating the video file.

Okay, so the absolute path to the video file is http://www.domain.com/wp-content/plugin ... work10.mp4, but since I'm using a WPMU installation for a subdomain training.domain.com, the path to access it should be training.domain.com/?s2member_file_download=Network10.mp4.

Here are the combinations that I have tried, but failed to get any of them working (and I'm logged in as the admin all the time).
[jwplayer config="Training" file="http://www.centilin.com/wp-content/plugins/s2member-files/Network10.mp4"]

[jwplayer config="Training" file="http://training.centilin.com/?s2member_file_download=Network10.mp4"]

[jwplayer config="Training" file="[s2File rewrite="yes" file="Network10.mp4" /]"]

I did get the videos show up, if they are outside that folder. So, what's the issue here?

Angela

Statistics: Posted by angelazou — January 9th, 2012, 11:38 pm

Re: Place Secure Video

2012-01-09T09:19:02-05:00

Honestly, I mentioned that I had problem directly accessing the file using the absolute path (domain.com/wp-content/plugins/s2member-files/example.mp4), but I later tried with the method mentioned in the configuration page (domain.com/?s2member_file_download=example.mp4), and I can access it without any issues. I think the problem is with the video plugin. I will see what JWPlayer people have to say. Thanks for all the inputs.

Angela

Statistics: Posted by angelazou — January 9th, 2012, 9:19 am

Re: Place Secure Video

2012-01-09T07:25:06-05:00

请用中文说说您遇到的问题。我也遇到放在s2member-files目录下的视频无法播放的问题，但是已经被jason解决了。请参考：http://www.primothemes.com/forums/viewtopic.php?f=4&t=16510&p=59989#p59989

Statistics: Posted by xigaogen — January 9th, 2012, 7:25 am

Re: Place Secure Video

2012-01-09T03:33:19-05:00

Well, interestingly enough. The page returned an error message (even with me logged into both sites). The thing is, I'm doing a WPMU set up and this is a subdomain training.centilin.com, whereas the files are located in the path of the main domain www.centilin.com (so the file would be located in www.centilin.com/wp-content/plugins/s2m ... xample.mp4). But I was unable to locate that file due to the error message.
Nevertheless, if you visit the page where this occurred (in my first post), the player still doesn't load.

Angela

Statistics: Posted by angelazou — January 9th, 2012, 3:33 am

Re: Place Secure Video

2012-01-09T02:38:45-05:00

Could you try accessing the URL to the video directly (while you're logged in) to see if it loads? If it doesn't load, then it's not a problem with the player but rather with the s2Member download restrictions. You can also just directly download a txt file instead a video to test it.

If the video loads fine when you access the URL directly in your browser, please try disabling your plugins one-by-one to see if any of those cause the problem to go away (it could be an update to another plugin that started the problem).

Statistics: Posted by xigaogen — January 9th, 2012, 2:38 am

Re: Place Secure Video

2012-01-07T07:48:23-05:00

I wonder if this is really about JWplayer. I mean if it doesn't work out in the end, would S2member be fine if I switched to another video plugin?

Angela

Statistics: Posted by angelazou — January 7th, 2012, 7:48 am

Re: Place Secure Video

2012-01-07T05:00:17-05:00

But how does that relates to the issue I have right now?

Edit: the HTACCESS rules caused my site to go down.

Statistics: Posted by angelazou — January 7th, 2012, 5:00 am

Re: Place Secure Video

2012-01-07T04:51:47-05:00

If you're running s2Member with mod_deflate for Apache (common on many hosts), you'll want to add this section to the top of your WordPress .htaccess file, so that your installation of Apache will know when it should NOT use GZIP compression.

RewriteEngine On
RewriteCond %{THE_REQUEST} (?:(?:^|\?|&)s2member_file_download\=.+|(?:^|/)s2member-files/.+)
RewriteRule ^(.*)$ - [E=no-gzip]

Statistics: Posted by xigaogen — January 7th, 2012, 4:51 am

Re: Place Secure Video

2012-01-07T02:24:53-05:00

The plugin settings remain the default, I haven't touched that (you can see from the screenshot below). But as you can see from my shortcode, I'm using a custom player configuration called Training. The settings that I have modified (from the default are in the basic settings page).
Picture 1.png
Picture 2.png

Edit: could it be a license problem? I'm using the free version now.

Statistics: Posted by angelazou — January 7th, 2012, 2:24 am

Re: Place Secure Video

2012-01-07T01:42:56-05:00

As long you are using S2member restriction and downloading options, your files will be protected.

The code seems to be OK, you need to look into the JW player plugin and make sure all of the settings are correct.

Most likely because you are using a sub domain, there might be a misconfiguration.

Sam

Statistics: Posted by drbyte — January 7th, 2012, 1:42 am

Re: Place Secure Video

2012-01-07T01:38:42-05:00

s2Member blocks access tot he s2member-files folder directly, so it's not possible for a user to do that.

Statistics: Posted by Bruce C — January 7th, 2012, 1:38 am

Re: Place Secure Video

2012-01-07T01:31:31-05:00

This is the shortcode I'm currently using:

Code:: English Lesson [jwplayer config=” Training” file=”http://www.centilin.com/wp-content/plugins/s2member-files/Network10.mp4”] 中文课程 [jwplayer config=” Training” file=”http://www.centilin.com/wp-content/plugins/s2member-files/Network10.mp4”]

And the question I have is how does the plugin secures the video from not exposing its address (and therefore preventing user from just typing in the address and not buying the membership)?

Angela

Statistics: Posted by angelazou — January 7th, 2012, 1:31 am

Re: Place Secure Video

2012-01-07T00:53:40-05:00

Check the player URL Path, try absolute path http://site.com/jwplayer/player.swf

/jwplayer/player.swf does not exist on sub or main domain

{type: "flash", provider: "http", src: "/jwplayer/player.swf",

That goes too for /jwplayer/jwplayer.js

Sam

Statistics: Posted by drbyte — January 7th, 2012, 12:53 am

Re: Place Secure Video

2012-01-06T01:18:26-05:00

I would guess there is probably a shortcode for the plugin. Try reading through the settings. It's mostly likely a lot simpler.

Statistics: Posted by Bruce C — January 6th, 2012, 1:18 am

Re: Place Secure Video

2012-01-06T01:09:17-05:00

I installed the plugin, but the player still doesn't show up. Should I use a different code instead?

Statistics: Posted by angelazou — January 6th, 2012, 1:09 am

Re: Place Secure Video

2012-01-06T00:40:51-05:00

Are you just using the standard JWPlayer, or do you have the plugin? Try putting this on your website and see if it plays it better:

http://wordpress.org/extend/plugins/jw- ... wordpress/

Statistics: Posted by Bruce C — January 6th, 2012, 12:40 am